ZT-900 Autoplanel-LKW-Platte, die Maschinenrolle bildet Maschine bildet
Basisinformation
Modell: ZT-009-10
Produktbeschreibung
KXD-900 AUTO PANEL ROLL FORMING MACHINE (Maschinenbilder sind als Referenz)
Technische Parameter der Rollformmaschine:
1. Technikparameter der Verarbeitungslinie
Main parameters of KXD-900 roll forming machine |
||
1 |
Suitable to process |
Color steel plate, galvanized sheet, aluminum coils and etc. |
2 |
Width of the feeding material |
1000mm |
3 |
Sheet width |
900mm |
3 |
Roller station |
14 rows |
4 |
Thickness of feeding material |
1.0-2.0mm |
5 |
Productivity |
8-12m/min |
6 |
Rollers' material |
45# steel |
7 |
Diameter of shaft |
90mm |
8 |
Weight |
About8.5 T |
9 |
Length |
10m×2.1m×1.5m |
10 |
Voltage |
380V 50HZ 3 phases |
11 |
Wall thickness of main forming machine |
14mm steel plate |
12 |
Main forming machine body |
400 mm H steel |
13 |
Motor power |
18.5 kw |
2. Verarbeitungstechnik und Bereitstellung
Prozesse: Manuelle Abwickelhaspel - Profiliermaschine - SPS-System - Hydraulikanlage -Postschnitt - Auslauf Tabelle
Equipment and Qty. |
|
Decoiler |
1 set |
Main roll forming machine |
1 set |
PLC control station |
1 set |
Hydraulic station |
1 set |
Post cut |
1 set |
Electric motor |
1 set |
Output table |
1 set |
Die Autopanel-LKW-Paneel-Rolle, die Maschine bildet, kann die Autoplatte produzieren, die für die LKW-lody Materialien verwendet wird. Die feautures dieser Autopanellollen-Formungsmaschine ist die: Die Maschine ist bedienungsfreundlich, das Autoplattenprofil mit dem nahen Winkel, so dass die Autoplatte viel stabiler als die mit dem runden Winkel ist.
Produktgruppe : Dachbahn Roll Umformmaschine > Dach- und Wandpanel-Umformmaschine